YOUR NEXT DISCOVERY

Waves, Light and Fields

Make patterns. Build instruments. Test what matter can do.

Complete the Course to Earn a Certificate and Join the Hall of Fame

A source sends parallel light toward a converging lens. The paths meet on a sensor connected to a readout. Moving highlights show travel toward the sensor; they are schematic light-path markers, not measured single-photon tracks. No numeric readings or physical speed are encoded.
A rightward travelling wave is compared with local material motion. In the top panel the marked rope piece moves up and down at a fixed horizontal place. In the lower panel marked material pieces move back and forth horizontally about fixed resting places while compression regions travel right. The four-second display cycle is schematic; it is not a measured wave period.

A CLOSER LOOK

How one object moves while a wave passes.

A sensor gives a reading. You decide what it can show. Build paths, tune simple models and test competing explanations, from a moving rope to a particle detector.

See it. Try it. Make it yours.

  1. How one object moves while a wave passes.

  2. How light bends, forms images and reveals a source.

  3. How charges create forces and store energy.

Algebra-based physics after mechanics and heat · What to know before you start

Bring with you: read whole-number measurements and their units Count whole numbers. Add whole numbers. Subtract whole numbers. Multiply whole numbers. Divide whole numbers. Earlier Course: electron-shell model scope, allowed-state model as an empirical constraint, model refinement, chemical behaviour versus nuclear behaviour, excited state as higher allowed internal energy, energy difference between supplied states Earlier Course: proton, neutron, electron location and relative mass in the atomic model, atomic number, mass number, elementary charge and symbol e, chemical element symbol, nuclear label positions for A and Z Earlier Course: relative frequency, probability between zero and one, independent trials, expected count, sample variation, trial and outcome, probability notation, sampling with or without replacement Earlier Course: interaction pair, free-body diagram, contact versus noncontact force, net force, force vector sum Earlier Course: kelvin, absolute-zero model limit, pressure-volume relation at fixed temperature, volume-temperature relation at fixed pressure, fixed amount condition Earlier Course: intercept, area of rectangular and triangular regions, piecewise graph, rate-time area as accumulated amount Earlier Course: uniform circular acceleration, centripetal as a direction requirement, Newtonian gravitation, inverse-square force, mass versus weight Earlier Course: conduction-rate model, convection and fluid motion, thermal radiation, emissivity, net radiative exchange Earlier Course: ion, cations and anions, net charge from particle counts, charge conservation in transfer Earlier Course: isotope, isotopic abundance, atomic mass unit, weighted average atomic mass, ground state as lowest internal energy, reverse inference of two-isotope abundance, relative atomic mass as a unitless comparison, mass number versus measured atomic mass Earlier Course: kinetic energy, work-energy relation, speed-squared dependence, translational energy Earlier Course: linear momentum, impulse, force-time area, momentum-change direction Earlier Course: reference frame, position coordinate, displacement, distance travelled, relative motion, scalar versus vector Earlier Course: gravitational potential reference, near-Earth mgh approximation, elastic potential energy, conservative interaction Earlier Course: power, power-time area, efficiency, useful-output definition, multi-stage efficiency Earlier Course: power as repeated multiplication, zero and negative powers, scientific notation, order of magnitude, square root as inverse of squaring, SI scale prefixes, base and exponent, multiplying and dividing common-base powers, adding scientific-notation values at a common power Earlier Course: kilo (1000), centi (1/100), milli (1/1000), micro (1/1000000), nano (1/1000000000); kilogram (kg), milligram (mg), millimetre (mm), millisecond (ms), nanometre (nm), metre, second, newton, joule; ratios of positive lengths. Earlier Course: direct proportion, inverse proportion, square dependence, held-constant condition, inverse-square dependence Earlier Course: tension model, Hooke's law, spring constant, elastic-limit assumption, force sharing in a simple system Earlier Course: thermal equilibrium, zeroth-law relationship, internal energy, temperature versus total internal energy Earlier Course: vector components, perpendicular directions, Pythagorean relation, angle and degrees, sine ratio, cosine ratio, vector sum by components Earlier Course: labelled axes and scale, coordinate pair, centimetre and cm, second and s Earlier Course: measurement interval, systematic offset Earlier Course: pressure as force per area, particle collisions with a wall

A sensor gives a reading. You decide what it can show. Build paths, tune simple models and test competing explanations, from a moving rope to a particle detector.

Start with measurements you can picture. Build wave, light and circuit models. Then use careful experiments to explore quantum, relativistic, nuclear and particle ideas.

By the end, you can…

  • Read wave records without confusing a bead with a travelling crest.
  • Choose ray paths, locate an image and check a detector’s limits.
  • Predict a charge’s force and energy change.
  • Trace a circuit and account for charge, voltage and power.
  • Test a transformer or a communication link.
  • Use photon energies, allowed levels and probability patterns.
  • Choose a frame before comparing time, length and energy.
  • Balance nuclear changes and compare decay explanations.
  • Build a claim from measurements and choose a test that could challenge it.

For another Course

  • Research-level quantum field calculations.
  • Numerical solutions of general relativistic field equations.

YOUR LEARNING PATH

One idea leads to the next.

0 of 129 Missions completed or proven
Unit 1

How waves move

Connect a changing local state to a travelling disturbance and its energy.

  1. What can one picture tell you? What do two pictures show?Mission 1 of 129Locked. Read a picture of a row of beads. Use pictures taken at different times to work out how one bead moved.
  2. Choose a force account and an energy accountMission 2 of 129Locked. Follow a push. Find where the energy goes.
  3. Connect a material measurement to a modelMission 3 of 129Locked. Load a piston. Predict what happens when a gas is squeezed.
  4. Test two routes across a benchMission 4 of 129Locked. Find which route can carry a signal across a bench.
  5. Connect a displacement with a restoring responseMission 5 of 129Locked. Pull a cart aside. Find what brings it back.
  6. Measure the period and frequency of repeated motionMission 6 of 129Locked. Count complete repeats. Separate timing from size.
  7. Link a spring oscillator's motion and energyMission 7 of 129Locked. Follow energy between a spring and its moving cart.
  8. Compare phase and the limits of a pendulum modelMission 8 of 129Locked. Compare two swings and check when the model works.
  9. Separate a travelling disturbance from local motionMission 9 of 129Locked. Follow one bead while a wave travels past it.
  10. Link a spatial snapshot with a time recordMission 10 of 129Locked. Join a wave photo to a clock reading.
  11. Add the disturbances where two pulses meetMission 11 of 129Locked. Predict the shape where two pulses meet.
  12. Follow phase and reflection without losing the pulsesMission 12 of 129Locked. Send a pulse to an end. Predict what comes back.
  13. Identify nodes and antinodes in a standing patternMission 13 of 129Locked. Find points that stay still throughout a wave cycle.
  14. Use the boundary to select allowed patternsMission 14 of 129Locked. Fit wave patterns between two fixed ends.
  15. Explain a driven response and its dampingMission 15 of 129Locked. Find the push timing that makes a strong response.
  16. Compare sound intensity on a logarithmic scaleMission 16 of 129Locked. Compare sounds without adding their level numbers.
  17. Build a received pattern from moving wavefrontsMission 17 of 129Locked. Follow the wave fronts from a moving siren.
  18. Compare source motion with receiver motionMission 18 of 129Locked. Predict what a moving listener hears.
Unit 2

Light, images and radiation

Use wave and ray models to interpret light measurements and their limits.

  1. Place visible light within the radiation spectrumMission 19 of 129Locked. Find a light wave’s place in the spectrum.
  2. Choose a band without confusing brightness and frequencyMission 20 of 129Locked. Choose a detector that can receive the signal.
  3. Use a surface normal to predict a reflected rayMission 21 of 129Locked. Aim a light ray with a mirror.
  4. Explain the location of a plane-mirror imageMission 22 of 129Locked. Trace where a mirror image seems to be.
  5. Compare speed, direction and wavelength at a boundaryMission 23 of 129Locked. Predict how light bends at a boundary.
  6. Find when a ray cannot transmit by refractionMission 24 of 129Locked. Find when light stays inside a material.
  7. Build a ray-based explanation of a lens imageMission 25 of 129Locked. Build a two-ray path and locate its image.
  8. Check the position and size of a detector imageMission 26 of 129Locked. Check a lens image with distances and signs.
  9. Explain spreading and interference at an openingMission 27 of 129Locked. Predict when a small opening spreads a wave.
  10. Separate magnification from resolving detailMission 28 of 129Locked. Decide whether two close sources can be told apart.
  11. Describe the direction of a transverse oscillationMission 29 of 129Locked. Choose which light direction a filter passes.
  12. Compare unpolarised light and crossed filtersMission 30 of 129Locked. Send light through several filters.
  13. Infer temperature from a bounded thermal modelMission 31 of 129Locked. Use a glow to compare temperatures.
  14. Separate a continuous background from spectral linesMission 32 of 129Locked. Separate a broad glow from a line pattern.
Unit 3

Electric charge, fields and potential

Connect forces at a distance with a quantitative energy-per-charge description.

  1. Connect charge counts with material responseMission 33 of 129Locked. Track charge as it moves between objects.
  2. Explain how a neutral object can be attractedMission 34 of 129Locked. Explain why an uncharged object can be attracted.
  3. Calculate the interaction between two chargesMission 35 of 129Locked. Predict how charge and distance change a force.
  4. Combine several electric forces by directionMission 36 of 129Locked. Add pushes from several charges.
  5. Describe electric influence per positive test chargeMission 37 of 129Locked. Use a small test charge to map an electric effect.
  6. Combine field contributions and critique field-line drawingsMission 38 of 129Locked. Combine fields and read their direction.
  7. Relate energy change to charge and potential differenceMission 39 of 129Locked. Track energy as a charge changes position.
  8. Compare potential values without inventing a unique zeroMission 40 of 129Locked. Change the zero without changing a prediction.
  9. Connect a uniform field with a potential changeMission 41 of 129Locked. Connect a voltage slope to an electric field.
  10. Read an equipotential map as an energy mapMission 42 of 129Locked. Read a map of equal-voltage lines.
  11. Relate separated charge, voltage and stored energyMission 43 of 129Locked. Charge two plates and account for stored energy.
  12. Change geometry with the correct fixed conditionMission 44 of 129Locked. Change a capacitor while keeping the right quantity fixed.
Unit 4

Circuits and magnetic interactions

Explain a complete electrical system using charge, potential and magnetic force.

  1. Follow charge through a complete circuitMission 45 of 129Locked. Count charge passing a point in a circuit.
  2. Read branches without confusing drift and signal motionMission 46 of 129Locked. Follow current through a junction.
  3. Infer resistance from a voltage-current recordMission 47 of 129Locked. Test whether current follows voltage in a fixed ratio.
  4. Connect a resistance with geometry and materialMission 48 of 129Locked. Choose a wire using its material and shape.
  5. Identify series and parallel connections by pathsMission 49 of 129Locked. Trace real connections in differently drawn circuits.
  6. Calculate equivalent resistance and divided quantitiesMission 50 of 129Locked. Solve a mixed circuit one connection at a time.
  7. Close junction and loop accountsMission 51 of 129Locked. Balance charge at a junction and energy around a loop.
  8. Include the source's own internal lossMission 52 of 129Locked. Find why a loaded source gives less terminal voltage.
  9. Connect electrical power with a measured energy useMission 53 of 129Locked. Turn electrical power and time into an energy account.
  10. Choose valid measurements and compare transmission lossesMission 54 of 129Locked. Measure power and compare transmission losses.
  11. Describe the field around currents and a solenoidMission 55 of 129Locked. Map the direction around a wire and a coil.
  12. Predict a moving charge's magnetic deflectionMission 56 of 129Locked. Predict how a moving charge turns in a magnetic field.
  13. Use magnetic force to turn a current loopMission 57 of 129Locked. Use forces on a coil to make it turn.
  14. Explain a motor's energy and material responseMission 58 of 129Locked. Account for a motor’s input and useful output.
Unit 5

Induction and electromagnetic waves

Explain how changing fields transfer energy across a device or empty space.

  1. Identify what changes the magnetic fluxMission 59 of 129Locked. Find which change alters the field through a loop.
  2. Predict induction and account for its energy costMission 60 of 129Locked. Predict an induced response and its energy cost.
  3. Connect a generator cycle with alternating voltageMission 61 of 129Locked. Follow the voltage through one generator turn.
  4. Compare a changing voltage with its heating effectMission 62 of 129Locked. Compare an alternating supply with a steady one.
  5. Connect coil turns with a voltage ratioMission 63 of 129Locked. Choose turns to reach a target voltage.
  6. Include load current and real lossesMission 64 of 129Locked. Check a transformer’s voltage, current and power together.
  7. Connect changing fields with a travelling waveMission 65 of 129Locked. Connect a changing field to a travelling light wave.
  8. Explain a field wave crossing an empty gapMission 66 of 129Locked. Account for energy carried by light.
  9. Describe the controlled variation in a signalMission 67 of 129Locked. Design a signal that survives its route.
  10. Choose a source-to-detector chainMission 68 of 129Locked. Choose a communication link and test its weak point.
Unit 6

Quantum evidence and the structure of matter

Use experiments to determine where a classical continuous model is insufficient.

  1. Compare intensity and frequency in an emission experimentMission 69 of 129Locked. Find which light can release electrons.
  2. Close a photon and emitted-electron energy accountMission 70 of 129Locked. Share photon energy between escape and motion.
  3. Relate a photon's energy and momentumMission 71 of 129Locked. Find the momentum carried by one photon.
  4. Compare radiation pressure and individual detectionsMission 72 of 129Locked. Predict the push from a beam of light.
  5. Connect particle momentum with a wavelengthMission 73 of 129Locked. Compare the wavelengths of moving particles.
  6. Build a distribution from individual detectionsMission 74 of 129Locked. Connect separate detections to a growing pattern.
  7. Describe a state by a probability distributionMission 75 of 129Locked. Read a probability pattern without inventing a path.
  8. Distinguish quantum spread from instrument uncertaintyMission 76 of 129Locked. Trade a narrow position spread for a momentum spread.
  9. Use discrete levels to explain possible transitionsMission 77 of 129Locked. Choose which jumps can absorb or emit a photon.
  10. Distinguish a bound transition from ionisationMission 78 of 129Locked. Find the energy needed to leave an atom.
  11. Describe an orbital without inventing a little orbitMission 79 of 129Locked. Read a state picture as chances, not an orbit.
  12. Connect allowed states with chemical patternsMission 80 of 129Locked. Fill allowed states without breaking their rules.
  13. Connect many-atom states with material conductionMission 81 of 129Locked. Use an energy gap to explain a material’s behaviour.
  14. Explain a light device through its state transitionsMission 82 of 129Locked. Account for light from an LED and a laser.
Unit 7

Space, time and relativistic energy

State the frame and approximation before comparing clocks, distances and energy.

  1. Compare inertial descriptions of one eventMission 83 of 129Locked. Describe one flash from two moving viewpoints.
  2. Explain the limit of ordinary velocity additionMission 84 of 129Locked. Check which speed rule works for light.
  3. Set up a timing procedure with light signalsMission 85 of 129Locked. Set separated clocks using light signals.
  4. Compare simultaneity in two moving framesMission 86 of 129Locked. Separate arrival times from times assigned to events.
  5. Build the light-clock path comparisonMission 87 of 129Locked. Use a light clock to compare elapsed times.
  6. Keep a clock comparison in one consistent frameMission 88 of 129Locked. Choose the right clock before calculating its time.
  7. Measure two endpoints at the same frame timeMission 89 of 129Locked. Measure both ends at the same time in one frame.
  8. Combine velocities without exceeding the model's limitMission 90 of 129Locked. Combine signed velocities without exceeding light speed.
  9. Separate rest energy, kinetic energy and momentumMission 91 of 129Locked. Separate mass, total energy and kinetic energy.
  10. Use the wider energy-momentum relationshipMission 92 of 129Locked. Check energy and momentum in one account.
  11. Connect freely falling and accelerated descriptionsMission 93 of 129Locked. Connect free fall to the experience inside a small lab.
  12. Compare clocks and light across a gravitational differenceMission 94 of 129Locked. Compare clocks and light signals at different heights.
  13. Compare independent tests of geometric gravityMission 95 of 129Locked. Match a gravitational prediction to a measurement.
  14. Keep an analogy and an approximation within their scopeMission 96 of 129Locked. Choose a gravity model that suits the question.
Unit 8

Nuclear change and mass-energy accounts

Use nuclear composition, probabilities and binding energy to explain measured changes.

  1. Compare a nucleus with separated constituentsMission 97 of 129Locked. Find energy hidden in a nucleus’s mass difference.
  2. Compare binding per nucleon across nucleiMission 98 of 129Locked. Compare binding per nucleon before choosing a reaction.
  3. Track identity through alpha and gamma changesMission 99 of 129Locked. Balance a nuclear change without losing charge.
  4. Close the charge and particle accounts in beta changeMission 100 of 129Locked. Complete a beta-decay account.
  5. Connect random decay with a half-life population ruleMission 101 of 129Locked. Predict a population without predicting one nucleus.
  6. Compare population with its present decay rateMission 102 of 129Locked. Turn a population and half-life into a decay rate.
  7. Infer an age from a parent-daughter accountMission 103 of 129Locked. Estimate an age from parent and daughter nuclei.
  8. Check contamination, loss and a dating method's rangeMission 104 of 129Locked. Test whether an isotope clock can be trusted.
  9. Separate radiation penetration from deposited energyMission 105 of 129Locked. Separate penetration from energy deposited.
  10. Read activity, dose and contamination as different claimsMission 106 of 129Locked. Choose the right quantity for a radiation claim.
  11. Account for fission energy and a neutron chainMission 107 of 129Locked. Follow energy and neutrons through a fission chain.
  12. Separate fusion-reaction gain from whole-device gainMission 108 of 129Locked. Check a fusion reaction and the whole machine’s account.
  13. Instrument investigation — audit the source and measurementMission 109 of 129Locked. Separate what a nuclear lab’s instruments measure.
  14. Instrument investigation — reconcile the particle and energy accountsMission 110 of 129Locked. Find a missing amount in a nuclear lab record.
  15. Instrument investigation — discriminate two signal explanationsMission 111 of 129Locked. Choose a test that separates two nuclear explanations.
Unit 9

Particles, interactions and the limits of current models

Connect particle classifications to measured processes and evidence.

  1. Distinguish constituents from composite particlesMission 112 of 129Locked. Sort particles by what they are made of and how they interact.
  2. Build a nucleon account within the particle classificationMission 113 of 129Locked. Build a proton or neutron from its valence quarks.
  3. Distinguish the roles of the fundamental interactionsMission 114 of 129Locked. Choose which interaction can explain an observation.
  4. Separate nuclear binding from particle-type changeMission 115 of 129Locked. Check which particle changes an interaction permits.
  5. Connect antiparticles, annihilation and pair productionMission 116 of 129Locked. Account for particle partners and their products.
  6. Check all the stated conserved quantitiesMission 117 of 129Locked. Keep charge, energy and momentum balanced.
  7. Use changing flavour as evidence about neutrinosMission 118 of 129Locked. Follow how a neutrino flavour pattern changes.
  8. Assess a weak signal without making every missing amount a neutrinoMission 119 of 129Locked. Make a careful claim from a very weak signal.
  9. State what the Higgs mechanism explainsMission 120 of 129Locked. Separate a background field from a detected particle.
  10. Account for a composite system's massMission 121 of 129Locked. Find where a composite object’s mass comes from.
  11. Infer an event from tracks and deposited energyMission 122 of 129Locked. Join tracks, timing and deposited energy into an event.
  12. Compare a signal with plausible background processesMission 123 of 129Locked. Test a candidate signal against a background.
  13. Keep a useful model within its tested domainMission 124 of 129Locked. Choose where a model’s predictions can be trusted.
  14. State what present models leave unresolvedMission 125 of 129Locked. Separate an open question from evidence already gained.
  15. Modern-matter investigation — choose the appropriate modelsMission 126 of 129Locked. Choose measurements that can test a new signal.
  16. Modern-matter investigation — close the quantitative accountsMission 127 of 129Locked. Reconcile the independent parts of a detector record.
  17. Modern-matter investigation — challenge competing explanationsMission 128 of 129Locked. Design a test where competing predictions differ.
  18. Modern-matter investigation — defend a bounded conclusionMission 129 of 129Locked. Build a final claim with evidence, a limit and a next test.Mastery Challenge

A Debsie Course · Algebra-based physics after mechanics and heat