YOUR NEXT DISCOVERY

Lines, Angles and Shapes

Read a drawing, measure a turn and use what you know to check a design.

Complete the Course to Earn a Certificate and Join the Hall of Fame

Two arms share one hinge on a drawing board. One swings open and returns while the other stays still.
A segment, a square-marked corner and a four-sided tile show the main kinds of evidence in a drawing.

A CLOSER LOOK

Trace a drawing

Check whether a drawing, a brace and a material order fit the intended design.

See it. Try it. Make it yours.

  1. Trace a drawing

  2. Measure and connect turns

  3. Test the shape families

Learners who can count and calculate with whole numbers. · What to know before you start

Bring with you: Count whole numbers, add, subtract, multiply and divide them, and read numbers such as 2.5.

Check whether a drawing, a brace and a material order fit the intended design.

Read and measure geometric diagrams. Use definitions, equal angles and angle sums to justify choices in a new design.

By the end, you can…

  • Tell what a mark represents, close a shape and measure a segment.
  • Measure a turn and work out unseen angles from connected lines.
  • Classify figures and decide which proposed sides or angles can fit.
  • Separate the outside length from the space inside and check a complete sign plan.

For another Course

  • Coordinate transformations and proof of congruence or similarity.
  • Right-triangle trigonometry, circles and solids.

YOUR LEARNING PATH

One idea leads to the next.

0 of 17 Missions completed or proven
Unit 1

Trace a drawing

Tell what a mark represents, close a shape and measure a segment.

  1. Read the ends of a strokeMission 1 of 17Locked. Identify a point, segment, ray or line from its endpoint marks.
  2. Close a shapeMission 2 of 17Locked. Decide whether a boundary makes a polygon and name it by its number of sides.
  3. Measure between two marksMission 3 of 17Locked. Measure lengths in centimetres, even when the first endpoint is away from zero.
Unit 2

Measure and connect turns

Measure a turn and work out unseen angles from connected lines.

  1. Find the size of a turnMission 4 of 17Locked. Name the vertex and compare an opening with quarter, half and full turns.
  2. Read a turn on a protractorMission 5 of 17Locked. Place the centre and baseline, then read the scale that begins at zero.
  3. Fill the missing part of a turnMission 6 of 17Locked. Use the known total of a right, straight or full turn to find its missing part.
  4. Test two straight pathsMission 7 of 17Locked. Distinguish parallel, intersecting and perpendicular lines.
  5. Read opposite cornersMission 8 of 17Locked. Find opposing and neighbouring angles where two straight lines cross.
  6. Follow one cut across two linesMission 9 of 17Locked. Use matching positions and crossed-line rules only when the two main lines are parallel.
Unit 3

Test the shape families

Classify figures and decide which proposed sides or angles can fit.

  1. Sort a triangle two waysMission 10 of 17Locked. Classify one triangle by both its side lengths and its angles.
  2. Find a missing triangle angleMission 11 of 17Locked. Find interior and exterior triangle angles, including the equal angles opposite equal sides.
  3. Try building a triangleMission 12 of 17Locked. Decide whether three rigid lengths close into a triangle with space inside.
  4. Find the four-sided familiesMission 13 of 17Locked. Use parallel sides, equal sides and right angles to identify overlapping quadrilateral families.
  5. Count turns in a polygonMission 14 of 17Locked. Use triangles to find a convex polygon's inside angle sum, then find an exterior turn.
Unit 4

Check a design

Separate the outside length from the space inside and check a complete sign plan.

  1. Walk the whole boundaryMission 15 of 17Locked. Measure perimeter, including edges inside a recess.
  2. Choose edging or coveringMission 16 of 17Locked. Choose perimeter or area from the material needed and distinguish length units from square units.
  3. Approve the sign planMission 17 of 17Locked. Use side lengths, angles and material measurements to check a new sign design.Mastery Challenge

A Debsie Course · Learners who can count and calculate with whole numbers.