YOUR NEXT DISCOVERY

Circuit Wizards: Electronics, Sensors and Smart Devices

Explore electronics, sensors and smart devices. Build ideas that work.

Complete the Course to Earn a Certificate and Join the Hall of Fame

A welcoming electronics workbench with a glowing lamp project, tools and a miniature greenhouse. An invitation to invent; not a wiring instruction.
A sketchbook, prototype board and finished room sensor show the journey from an idea to a useful device. Decorative scene, not a build diagram.

A CLOSER LOOK

First Spark

Make useful things. Understand why they work. Find what went wrong and improve your design.

See it. Try it. Make it yours.

  1. First Spark

  2. Circuit Detective

  3. Code Meets Circuits

Absolute beginner, ages 12+. · What to know before you start

Bring with you: Count and compare whole numbers. Add, subtract, multiply and divide small numbers; a calculator is welcome. No electronics or coding knowledge is assumed.

Make useful things. Understand why they work. Find what went wrong and improve your design.

Start with a small lamp. Learn to explain, measure, build, code and repair low-voltage electronic devices. On-screen tasks check your decisions and reasoning. Hands-on builds need the listed equipment and a practical review; the app cannot inspect your real wiring or certify physical work.

By the end, you can…

  • Read, build and measure simple low-voltage circuits. Find why a lamp will not light.
  • Use resistors, capacitors, transistors and logic to make a circuit respond to its surroundings.
  • Write and explain small programs that read inputs, control outputs and respond without freezing.
  • Read sensor data, check its quality, connect modules and control a small physical system.
  • Connect a device, handle missing data and lost networks, and plan dependable low-power operation.
  • Plan an original device, design its board, test it and explain the evidence that it meets its goal.

For another Course

  • Mains wiring, opening power adapters, high-voltage work and homemade lithium-battery charging circuits.
  • Advanced radio-frequency design, high-speed multilayer boards, advanced control theory and professional electrical certification.
  • Automatic execution of learner code or automatic grading of real hardware. Code is inspected through bounded native tasks; practical work uses an external editor, real tools and explicit review.
  • Equipment purchases, PCB orders and internet accounts are separate learner decisions. No paid cloud service is required for the core route.

YOUR LEARNING PATH

One idea leads to the next.

0 of 97 Missions completed or proven
Unit 1

First Spark

Read, build and measure simple low-voltage circuits. Find why a lamp will not light.

  1. Your first invention starts hereMission 1 of 97Locked. Choose a suitable work setup and put a safe build sequence in order.
  2. The lamp needs a way backMission 2 of 97Locked. Trace a new lamp circuit and locate the gap that prevents it working.
  3. A tiny gap with a big jobMission 3 of 97Locked. Predict which lamps change when a switch opens in a new arrangement.
  4. Why is the wire wearing a coat?Mission 4 of 97Locked. Choose materials for the inside and outside of a test lead and explain a failed contact.
  5. Hidden paths under the holesMission 5 of 97Locked. Use a supplied breadboard map to place two leads without accidentally joining them.
  6. Compare two pointsMission 6 of 97Locked. Choose the two measurement points and interpret positive and negative readings.
  7. How much charge passes?Mission 7 of 97Locked. Select a safe current-measurement connection and distinguish current from voltage.
  8. Make the flow smallerMission 8 of 97Locked. Predict how replacing a resistor changes current at the same supply voltage.
  9. Small numbers without the muddleMission 9 of 97Locked. Convert given volts, milliamperes and kilohms before comparing measurements.
  10. Predict the current before you buildMission 10 of 97Locked. Calculate a resistor value for a new voltage and current requirement.
  11. Let the little light liveMission 11 of 97Locked. Choose an LED resistor from supplied part data and check the resulting current.
  12. Read a circuit like a mapMission 12 of 97Locked. Translate a new schematic into a connection list without relying on physical positions.
  13. One path all the way roundMission 13 of 97Locked. Find current and voltage drops in a two-resistor series circuit.
  14. Give the current a choiceMission 14 of 97Locked. Calculate branch currents and predict the effect of opening one branch.
  15. Where does the energy go?Mission 15 of 97Locked. Calculate resistor power and select a suitable rating with margin.
  16. Make your first light panelMission 16 of 97Locked. Repair a supplied light-panel design, calculate its resistor and choose useful tests.
Unit 2

Circuit Detective

Use resistors, capacitors, transistors and logic to make a circuit respond to its surroundings.

  1. Make a smaller voltageMission 17 of 97Locked. Calculate an unloaded divider output and identify why a connected load changes it.
  2. Turn a knob, change a signalMission 18 of 97Locked. Choose the three connections for an adjustable divider and predict its limits.
  3. Make light change a voltageMission 19 of 97Locked. Choose a light-sensor divider that gives a higher output in darkness.
  4. Store a little chargeMission 20 of 97Locked. Predict charging and discharging behavior and select a safe component orientation.
  5. Slow a sudden changeMission 21 of 97Locked. Compare RC response times and reject the claim that one time constant means fully charged.
  6. A path with a preferred directionMission 22 of 97Locked. Interpret a diode orientation using its supplied symbol and package mark.
  7. A small current controls a larger oneMission 23 of 97Locked. Choose a complete transistor load-switch circuit with base-current limiting.
  8. Switch a load with a voltageMission 24 of 97Locked. Choose a MOSFET from supplied on-resistance data and explain a floating-gate fault.
  9. Which voltage is bigger?Mission 25 of 97Locked. Predict a threshold detector’s output from given input and reference voltages.
  10. Stop the flicker near the edgeMission 26 of 97Locked. Trace a noisy sensor through two thresholds without inventing extra switching.
  11. Make a small change easier to readMission 27 of 97Locked. Calculate a simple amplifier output and identify saturation from given limits.
  12. Make decisions with gatesMission 28 of 97Locked. Construct a gate decision for two given conditions and test all input cases.
  13. Read a repeating signalMission 29 of 97Locked. Find period, frequency and duty cycle from a labelled pulse diagram.
  14. Watch voltage change with timeMission 30 of 97Locked. Read a new waveform using supplied horizontal and vertical scales.
  15. Follow the evidence to the faultMission 31 of 97Locked. Choose the next measurement that distinguishes two possible circuit faults.
  16. Build a light that notices darknessMission 32 of 97Locked. Repair a night-light design and justify tests for its two switching thresholds.
Unit 3

Code Meets Circuits

Write and explain small programs that read inputs, control outputs and respond without freezing.

  1. Meet the tiny computerMission 33 of 97Locked. Separate the jobs of program, processor and connected components.
  2. Each pin has a jobMission 34 of 97Locked. Connect a sensor using supplied pin and voltage limits without overloading an output.
  3. Give the board its first instructionsMission 35 of 97Locked. Trace a small program and distinguish startup behavior from repeated behavior.
  4. Give a value a nameMission 36 of 97Locked. Trace changing integer values through assignments and identify overflow in a supplied range.
  5. Let the code chooseMission 37 of 97Locked. Predict outputs at, below and above an exact threshold.
  6. Repeat with a reasonMission 38 of 97Locked. Correct a bounded loop and state its exact number of repetitions.
  7. Give one job a nameMission 39 of 97Locked. Trace a function call from supplied argument to returned result and receiving variable.
  8. Ask the program what happenedMission 40 of 97Locked. Choose useful diagnostic messages and distinguish a compile error from wrong runtime behavior.
  9. Read a buttonMission 41 of 97Locked. Trace the correct program behavior for an active-low button.
  10. Give an unpressed button a clear answerMission 42 of 97Locked. Repair a floating input and explain why a closed switch does not short the supply through a pull-up.
  11. One press, one actionMission 43 of 97Locked. Interpret a bounce trace and count intended button events after a given debounce rule.
  12. Turn voltage into a numberMission 44 of 97Locked. Convert a supplied ADC code to an approximate voltage and identify an out-of-range input.
  13. Make fast on-off feel smoothMission 45 of 97Locked. Choose a duty cycle and distinguish PWM from a steady analog voltage.
  14. Keep checking while time passesMission 46 of 97Locked. Repair a timing routine that misses button presses while waiting.
  15. Give each mode clear rulesMission 47 of 97Locked. Trace a new device through events and choose transitions that avoid impossible states.
  16. Build the quickest-finger gameMission 48 of 97Locked. Repair a reaction-game state table and test early, valid and repeated presses.
Unit 4

Sense, Decide, Act

Read sensor data, check its quality, connect modules and control a small physical system.

  1. Read the page that knows the partMission 49 of 97Locked. Choose a compatible sensor using supply, signal and operating-condition data.
  2. Can you trust that number?Mission 50 of 97Locked. Compare sensor records and identify a consistent offset versus noisy readings.
  3. Give your sensor a fair referenceMission 51 of 97Locked. Calculate and apply a correction to a new reading and state the calibration range.
  4. How often should you look?Mission 52 of 97Locked. Choose sampling intervals for given changes and explain what the readings cannot establish.
  5. Calm the noise, keep the changeMission 53 of 97Locked. Calculate a moving average and choose when its delay is unacceptable.
  6. Two wires, several devicesMission 54 of 97Locked. Diagnose an address conflict and select valid shared connections and pull-ups.
  7. Send bits with a clockMission 55 of 97Locked. Select the correct peripheral and trace a supplied clocked bit sequence.
  8. Agree on how fast to talkMission 56 of 97Locked. Repair mismatched serial settings and crossed transmit-receive connections.
  9. Show a useful resultMission 57 of 97Locked. Design an honest display for valid, stale and missing measurements.
  10. Ask a motor for a positionMission 58 of 97Locked. Choose a valid servo command and a suitable power connection from supplied data.
  11. Give the motor its own power pathMission 59 of 97Locked. Choose a rated driver and reject an H-bridge state that shorts the supply.
  12. Where does the motor’s energy go?Mission 60 of 97Locked. Place a diode correctly across a one-direction switched inductive load.
  13. Check the result, then actMission 61 of 97Locked. Trace a temperature controller and distinguish feedback from a fixed timer.
  14. More error, more action?Mission 62 of 97Locked. Calculate bounded commands and compare aggressive and gentle control from supplied traces.
  15. Make the parts work togetherMission 63 of 97Locked. Find a power or signal conflict in a multi-module device before connecting it.
  16. Build a tiny climate keeperMission 64 of 97Locked. Repair a greenhouse controller and explain tests for sensor loss and manual override.
Unit 5

Smart Devices That Last

Connect a device, handle missing data and lost networks, and plan dependable low-power operation.

  1. Move to a connected boardMission 65 of 97Locked. Adapt an existing design using the exact destination board’s pin and voltage specifications.
  2. Find another deviceMission 66 of 97Locked. Distinguish local communication from an internet-dependent service.
  3. Join, check, reconnectMission 67 of 97Locked. Design a joining sequence that keeps local controls responsive.
  4. Ask for data, read the replyMission 68 of 97Locked. Interpret a response and reject missing or wrongly typed measurements.
  5. Send updates when they matterMission 69 of 97Locked. Choose topic routes and prevent a repeated message from repeating an actuator action.
  6. Give your device a clear windowMission 70 of 97Locked. Choose a graph and status message that do not hide missing data.
  7. When was that reading true?Mission 71 of 97Locked. Reject stale measurements and distinguish elapsed-time checks from clock timestamps.
  8. Keep what matters after a restartMission 72 of 97Locked. Choose what to save and avoid writing an unchanged value on every program loop.
  9. Lose the network, keep the deviceMission 73 of 97Locked. Plan offline behavior without freezing the device or growing a queue forever.
  10. Decide what failure should doMission 74 of 97Locked. Choose failure responses for a fan and an alarm from their different requirements.
  11. Give each part the voltage it needsMission 75 of 97Locked. Compare two power choices using supplied efficiency and heat limits.
  12. Keep sudden demands localMission 76 of 97Locked. Place a decoupling capacitor and diagnose a motor-triggered reset from evidence.
  13. Estimate how long it can runMission 77 of 97Locked. Estimate runtime from supplied usable capacity and a mixed activity schedule.
  14. Wake only when neededMission 78 of 97Locked. Calculate average current and choose a wake schedule that still meets response needs.
  15. Let the right messages throughMission 79 of 97Locked. Reject invalid commands, protect credentials and minimize collected data.
  16. Build a monitor you can trustMission 80 of 97Locked. Repair a connected room-monitor plan and choose tests proving recovery and honest data display.
Unit 6

Inventor’s Studio

Plan an original device, design its board, test it and explain the evidence that it meets its goal.

  1. Start with someone’s problemMission 81 of 97Locked. Rewrite vague requests as measurable requirements without inventing user needs.
  2. Draw the jobs and connectionsMission 82 of 97Locked. Choose a device structure and explain a tradeoff using stated requirements.
  3. Choose parts with evidenceMission 83 of 97Locked. Select compatible substitutes using supplied datasheets and a budget.
  4. Test the risky idea firstMission 84 of 97Locked. Choose a small experiment that resolves the highest-risk design assumption.
  5. Keep a useful trail of changesMission 85 of 97Locked. Match test results to exact code versions and recover a known working revision.
  6. Try the edges, not just the happy pathMission 86 of 97Locked. Create a bounded test set covering normal, boundary and failure cases.
  7. Draw the board before the boardMission 87 of 97Locked. Correct a schematic connection and explain what an electrical check cannot prove.
  8. Match the drawing to the real partMission 88 of 97Locked. Choose a footprint from dimensions and verify pin-one orientation.
  9. Give parts a sensible placeMission 89 of 97Locked. Place connectors and decoupling parts using the supplied physical constraints.
  10. Turn connections into copperMission 90 of 97Locked. Repair an unrouted or shorted connection using given width and clearance rules.
  11. Let the tools catch mistakesMission 91 of 97Locked. Distinguish rule-check failures from an electrically valid but wrong design.
  12. Prepare a board someone can makeMission 92 of 97Locked. Check a board-output package against its schematic, footprint and revision records.
  13. Make a connection that staysMission 93 of 97Locked. Identify joint defects from supplied pictures and order supervised low-voltage assembly checks.
  14. Make it easy to use and repairMission 94 of 97Locked. Choose an enclosure arrangement that meets access, ventilation and cable requirements.
  15. Show that it does the jobMission 95 of 97Locked. Evaluate test results honestly and identify unmet requirements before release.
  16. Prepare your design defenseMission 96 of 97Locked. Explain a design decision with evidence, plan a specific revision and prepare a reproducible handoff.
  17. Your invention, your evidenceMission 97 of 97Locked. Repair an unfamiliar device design, justify its power and control choices, and present a separately reviewed original build.Mastery Challenge

A Debsie Course · Absolute beginner, ages 12+.